
雙組份密封膠的固化需要一定時間
時間:2018-04-03 來源:http://pawld.cn/ 發布人:昌盛機械
1.由于雙組份密封膠的固化需要一定時間,因此雙組份打膠機,已涂了雙組份密封膠的玻璃應水平輕輕搬動。
1., since the curing of two component sealants takes a certain time, the two component glue machine has been coated with two components of sealant glass and should be moved gently.
2.A組、B組份膠應保持清潔,嚴防異物進入膠中。
Group 2.A and B components should be kept clean, and foreign matters should be strictly prevented from entering the glue.
3.在連續工作過程中,膠槍每次停止工作時間一般不得超過20分鐘,否則,應用A組份膠沖出全部混合膠,直至單一的A組份膠從槍口排出為止。
3. in the continuous working process, the glue gun will not stop working more than 20 minutes each time. Otherwise, all the mixed glue is washed out with A component glue until the single A component is discharged from the muzzle.
4.高壓膠管不得強行擠壓、彎曲,防止影響系統正常工作。
4., high pressure hose should not be forced to bend or bend to prevent the system from functioning normally.
5.混膠器應經常保持暢通,以保證良好的出膠效果。如遇堵塞情況,可用丙酮浸泡后清洗。建議每5組清洗一次。
5., rubber mixer should be kept regular and smooth, so as to ensure good glue production. In case of clogging, acetone can be soaked and cleaned. It is suggested that every 5 groups be cleaned once.
6.當膠槍長時間不用時(超過一周),應拆下槍體使用溶劑將膠槍和混膠器內的殘留膠體清洗干凈。
6., when the glue gun is not used for a long time (more than a week), the gun body should be removed and the residual colloid in the glue gun and glue mixing machine should be cleaned with solvents.
7.不同雙組份膠生產廠家所生產的膠內含雜質數量不同,根據實際情況清晰B組分的過濾網及單向止回閥,建議每?jī)山M清洗一次.
7. the number of impurities in the rubber produced by the different double component rubber manufacturers is different. According to the actual situation, the filter net and the one-way check valve of the B component are clear. It is suggested that every two groups be cleaned once.
本文由雙組份打膠機為您提供,我們的網站是:http://linshi.jncsjx.com我們將以全心全意的熱情為您提供更優質的服務,歡迎您的訪問!
This article is provided by the double component glue machine for you. Our website is: http://linshi.jncsjx.com we will provide you with more quality service and welcome your visit with wholehearted enthusiasm.
- 中空玻璃加工設備:立式與臥式清洗機的差異化解析 2025/06/06
- 雙組份打膠機切換膠水清潔全流程解析 2025/06/05
- 全自動封膠線輔助傳送前限位是什么意思? 2025/06/04
- 雙組份打膠機是為解決什么問題產生的呢? 2025/06/03
- 全自動丁基膠涂布機操作注意事項:細節決定品質與效率 2025/05/27
- 雙組份打膠機:解碼膠水混合后的固化時間控制藝術 2025/05/26
- 臥式丁基膠涂布機傳動系統維護要點解析 2025/05/20
- 中空玻璃加工必備8大設備詳解 2025/05/19
- 全自動鋁條折彎?rùn)C(jī)在工作中有什么優勢? 2025/05/16
- 全自動丁基膠涂布機在工業領域做出來什么優化? 2025/05/14
產品分類Product categories
聯系我們Contact us
- 咨詢熱線:0531-85717458 13705446998
- 公司地址: 山東省德州市齊河安頭鄉企巢工業園
- 掃碼聯系我們: